| Cat No. XP.IS.140 |
Description |
Units |
| 303.010 |
Small Depth Gauge |
1 |
| 804.110 |
LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm |
4 |
| 804.120 |
LCP Drill Sleeve 2.7mm for 2.0mm Drill Bit |
4 |
| XP.910.001 |
Drill Bit – S.S. – Quick Coupling End Dia. 2.5mm X 150mm Long |
2 |
| XP.910.002 |
Drill Bit – S.S. – Quick Coupling End Dia. 2.8mm X 180mm Long |
2 |
| XP.910.003 |
Drill Bit – S.S. – Quick Coupling End Dia. 1.8mm X 100mm Long |
2 |
| XP.910.004 |
Drill Bit – S.S. – Plain Shank, Jacob Chuck End Dia. 2.0mm X 125mm Long |
2 |
| XP.910.005 |
Drill Bit – S.S. – Quick Coupling End Dia. 2.7mm X 115mm Long |
1 |
| XP.910.006 |
Drill Bit – S.S. – Plain Shank, Jacob Chuck End Dia. 3.0mm X 115mm Long |
2 |
| XP.910.008 |
Bone Tap – Quick Coupling End For 2.7mm Locking Head Screws, Length 70mm |
2 |
| XP.910.009 |
Bone Tap – Quick Coupling End Dia. 3.5mm, Thread Length 50mm, Total Length 110mm |
1 |
| XP.910.010 |
Bone Tap – Quick Coupling End Dia. 3.5mm, Thread Length 65mm, Total Length 185mm |
1 |
| XP.910.011 |
Bone Tap – Quick Coupling End Dia. 4.0mm,-Cancellous,Thread Length 20mm,Total Length 110mm |
1 |
| XP.910.012 |
Hexagonal Screw Driver -2.0mm Tip Silicon Handle |
1 |
| XP.910.013 |
Hexagonal Screw Driver Shaft, Q.C. End 2.0mm Tip |
1 |
| XP.910.015 |
Hexagonal Screw Driver Shaft, Q.C. End 2.5mm Tip Length 140mm |
1 |
| XP.910.016 |
Tourque Limiting Handle for Screw Driver 2.0mm Tip (0.8N.M) |
1 |
| XP.910.017 |
Tourque Limiting Handle for Screw Driver 2.5mm Tip (1.5 N.M) |
1 |
| XP.910.018 |
Self Holding Sleeve for 2.7 mm Locking Head Screws |
1 |
| XP.910.019 |
Self Holding Sleeve for 2.7 mm Cortical Screws |
1 |
| XP.910.020 |
Depth Gauge for 2.7mm Locking Head Screws |
1 |
| XP.910.021 |
Depth Gauge for 2.7mm Cortical Screws |
1 |
| XP.910.023 |
Small Plate Bender – Pair |
1 |
| XP.910.024 |
Plate Bending Plier – Straight |
1 |
| XP.910.025 |
Plate Bending Plier – Curved |
1 |
| XP.910.027 |
Variable Angle Drill Guide for VA-LCP 2.7MM Plates |
1 |
| XP.910.029 |
LCP Universal Drill Guide 2.0/2.7mm |
1 |
| XP.910.030 |
LCP Universal Drill Guide – 2.5/3.5mm |
1 |
| XP.910.033 |
Guide Wire Plain Trocar Tip 1.5mm X 150mm |
6 |
| XP.910.034 |
Threaded Guide Wire 1.5mm X 150mm |
2 |
| XP.910.035 |
Small Neutral & Loaded Drill Guide 2.5mm |
1 |
| XP.910.036 |
Drill & Tap Sleeve Combined 2.5/3.5mm |
1 |
| XP.910.037 |
Counter Sink, Q.C. End 6.0mm Head (For 2.7, 3.5 & 4.0mm Screws) |
1 |
| XP.910.038 |
Hollow Reamer For Removal of Damage Screw (For 2.7,3.5&4.0mm Screws) |
1 |
| XP.910.039 |
Conical Extraction Screw For 2.7, 3.5 & 4.0mm Screws |
1 |
| XP.910.040 |
Hohmann Retractor 16mm Wide, Long Narrow Tip, 240mm Length |
2 |
| XP.910.041 |
Hohmann Retractor 5.0mm Wide, Short Narrow Point, 165mm Length |
1 |
| XP.910.042 |
Hohmann Retractor 9.0mm Wide, Short Narrow Point, 165mm Length |
1 |
| XP.910.043 |
Periosteal Elevator 3.0mm Width, Curved Blade, Straight Edge |
1 |
| XP.910.044 |
Periosteal Elevator 3.0mm Width, Curved Blade, Round Edge |
1 |
| XP.910.045 |
Periosteal Elevator – Curved 9.0mm |
1 |
| XP.910.046 |
Periosteal Elevator – Curved 12mm |
1 |
| XP.910.047 |
Quick Coupling Handle T -Type |
2 |
| XP.910.048 |
Mini Reduction – Forceps Pointed |
1 |
| XP.910.049 |
Screw Holding – Forceps |
1 |
| XP.910.050 |
Pin -Wrench |
1 |
| XP.910.051 |
Self Centering Bone Holding Forceps -190mm |
2 |
| XP.910.052 |
Reduction forceps With Pointed Soft Look-155mm |
1 |
| XP.910.053 |
Reduction forceps With Serrated Soft Lock – 155mm |
1 |
| XP.910.054 |
Reduction Forceps – Pointed Ratchet Lock – 180mm |
1 |
| XP.910.055 |
Reduction forceps – Serrated Speed Lock – 170mm |
1 |
| XP.910.056 |
Aluminium Screw Box For 2.7/3.5/4.0mm Small Locking Fragment |
1 |
| XP.910.057 |
Guide Wire Plain Trocar Tip 2.0mm X 150mm |
2 |
| XP.910.058 |
Threaded Guide Wire 2.0mm X 150mm |
1 |
| XP.910.059 |
Hexagonal Screw Driver – 2.5mm Tip |
1 |
| XP.400.141 |
Graphic Instrument Box for Small Fragment Locking System |
1 |
