| Cat No. IS.102 |
Instrument Set Graphic Box |
Units |
| 185.127 |
Kirschner Wire with Trocar Tip Dia. 1.2mm, Length 150mm |
3 |
| 185.146 |
Kirschner Wire with Trocar Tip Dia. 1.6mm, Length 150mm |
3 |
| 260.210 |
Drill Bit – S.S. – Quick Coupling End Dia. 2.0mm X 140mm Long |
1 |
| 260.250 |
Drill Bit – S.S. – Quick Coupling End Dia. 2.5mm X 115mm Long |
1 |
| 260.281 |
Drill Bit – S.S. Quick Coupling End Dia. 2.8mm x 180mm Long – Calibrated |
1 |
| 264.025 |
Bone Tap – Quick Coupling End Dia. 3.5mm, Thread Length 50mm, Total Length 110mm |
1 |
| 301.025 |
Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip (for 3.5mm Cortical & 4.0mm cancellous Screw) |
1 |
| 303.010 |
Small Depth Gauge |
1 |
| XP.306.010 |
Quick Coupling Handle T-Type |
1 |
| 307.060 |
Drill & Tap Sleeve Combined – 2.5/3.5mm |
1 |
| 340.020 |
Self Centering Bone Holding Forceps 190mm |
2 |
| 341.030 |
Reduction forceps – Serrated Speed Lock – 170mm |
1 |
| 342.020 |
Reduction Forceps – Pointed Ratchet Lock – 170mm |
1 |
| 379.015 |
Hohmann Retractor 8mm Wide, Short Narrow Point, 160mm Length |
1 |
| 382.006 |
Periosteal Elevator – Curved 6mm |
1 |
| 382.010 |
Periosteal Elevator – Curved 10mm |
1 |
| 803.120 |
LCP Bending Iron for Re-Construction Plate (Use in Pairs) for 3.5 & 4.5 LCP Plate |
1 |
| 804.105 |
LCP Universal Drill Guide 3.5mm |
1 |
| 804.110 |
LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm |
2 |
| 804.115 |
LCP Centering Sleeve for K. Wire 1.6mm |
1 |
| 804.120 |
LCP Drill Sleeve 2.7mm for 2.0mm Drill Bit |
2 |
| 804.155 |
Centering Sleeve for K.Wire 1.25mm |
1 |
| 304.010 |
Small Neutral & Loaded Drill Guide |
1 |
| 804.162 |
Q.C. Torque Screw Driver Handle – 2.0mm Tip (Torque 0.8Nm) |
1 |
| 804.166 |
Hexagonal Screw Driver Q.C.End Shaft – 2.0mm Tip (for Torque Handle 0.8Nm) |
1 |
| 804.163 |
Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) |
1 |
| 804.168 |
Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip (for Torque Handle 1.5Nm) |
1 |
| 400.076 |
Graphic Box for Small Fragment Locking System |
1 |
